All your transfers are laser pre-cut directly into the reflective material and supplied as a 23x40cm sheet. This innovative cutting method delivers particularly sharp, fine contours as well as much easier weeding.
- Silver Reflect: highly resistant, reflects light intensely in compliance with the ISO EN20471 standard
- White Reflect: perfectly suited to the dark outfits worn by security agents, in line with the regulation in effect since 1 October 2024
- Reflect colour: Raspberry, Black Dark, Neon Blue, Green and Yellow
- Reflect hologram: a striking visual effect that makes a lasting impression
Both aesthetic and technical, this marking is ideal for the customisation of workwear, sportswear or advertising clothes.
*SubliStop option (available on white only): it acts as a real barrier by blocking sublimation lifts, especially on sublimated fabrics.
Find out more: the ISO EN20471 standard explained.

OEKO-TEX® STANDARD 100 labelled
Label no.: CQ 580/2 IFTH
Tested for harmful substances –
www.oeko-tex.com
Reflect fits on all types of textiles, light as well as dark, and also on sublimated fabrics (with the SubliStop option for white).
23 x 40 cm
Silver Reflect:
150-170°C for 10-15s
Cold peel
Other Reflect:
150-170°C for 10-15s
Hot peel
A Laser Cut Reflective transfer is applied at 150-170 °C for 10 to 15 seconds.
The carrier is peeled off cold for Reflect Silver, and hot for the other Reflect shades.
The PrintMyTransfer Laser Cut Reflective transfer can be washed at up to 60 °C.
The PrintMyTransfer Laser Cut Reflective transfer can be applied to all types of textiles, light or dark, and sublimated fabrics (SubliStop option for white).
Laser Cut can be ordered from 5 boards of 23 x 40 cm, up to 100 boards.
For a larger quantity, contact us.
A PrintMyTransfer Laser Cut board is manufactured in D+5 working days, depending on quantity and availability.